Bathology Atmospheric 310

Single Vent Bath Fan w/ Optional Lighting, 100 CFM

Model
Atmospheric 310

Requires ceiling grille with housing and wall or roof vent.  Consider the Atmospheric 320 for dual area ventilation.

This product is not designed for In-Shower applications. For Steam or In-Shower use please see the Atmospheric 410

Your Price
$823.40
  • Super quiet performance
  • High CFM/Watt efficiency
  • Superior performance @ Higher Static
  • Small 7” grille diameter
  • Optional Dimmable 50W Halogen Lighting
  • Optional Dimmabe LED Lighting
  • May qualify for local utility rebate
  • Simplified installation
  • Inline backdraft damper
  • Remote placement of fan motor
  • Flex duct installation
  • EBM motor assembly
  • Variable speed control
  • Uses 4” duct
  • C-UL US listed
  • UL listed for Wet Locations
  • IC rated
  • Remote fan, 100 CFM with mounting bracket
  • Damper, 4"
  • Electronic Timer Control
  • Flex Duct, 4"x25'
  • Mastic, 11oz tube
  • (3) Sheet Metal screws
  • (4) Duct Straps, 18"
  • (4) Duct Straps, 36"
  • Manufacturer’s warranty
  • Installation manual
Swipe horizontally to reveal full table content.
Model Atmospheric 310
Swipe horizontally to reveal full table content.
Fan
Type In-Line
Dimensions 9-1/2" Diameter x 10" Length
Housing Composition ABS - PC Blend Thermo Plastic
Air Volume CFM: 100 @ .20" W.G.
AC Voltage Operating Voltage 120VAC
Power Consumption 21.1W
Nominal Amperage 0.18 Amps
Lubrication Permanently Lubricated, Sealed Ball Bearings
Protection Thermal Overload, Automatic Reset
Speed Control 100% Speed Controllable
Testing U.L. Listed; CSA Certified
Airstream Tolerance Up To 140° F
Swipe horizontally to reveal full table content.
Damper
Dimensions 4" Diameter x 6" Length
Body Composition Galvanized Steel, 28 Gauge
Blade Composition Aluminum Blades
Seal Composition Foam
Swipe horizontally to reveal full table content.
Roof Cap (Option)
Type Removable Screen, Duct Extension
Cap Dimensions 8-1/4"L x 6-1/4"W x 4-1/4"H
Composition Galvanized Steel, 28 Gauge
"Rough-In" Cut-Out 4-1/8"
Duct Connection 4"
Swipe horizontally to reveal full table content.
Wall Vent (Option)
Type Duct Extension
Vent Dimensions 6"L x 6"W x 7/16"H
Duct Extensions 4" Diameter x 12' Length
Grille Composition Polyethylene Plastic, UV Resistant, Brittleness Temperature of -99° F
Extension Composition Galvanized Steel, 28 Gauge
"Rough-In" Cut-Out 4-1/8"
Duct Connection 4"
Swipe horizontally to reveal full table content.
Flex Duct
Dimensions 4" Diameter x 25' Length
Composition Reinforced Grey Polyester, Fiberglass Insulation
Testing UL-181
R-Value 4.2
Operating Temperatures Max -20° F To 140° F
Swipe horizontally to reveal full table content.
Duct Tie
Composition Nylon
Operating Temperatures Max 185° F
Tensile Strength 175 lbs
Testing UL-181-B-C
Swipe horizontally to reveal full table content.
Mastic
Composition Liquid Sealant, Water-Based, UV Resistant, Grey
Use Indoor / Outdoor
Testing UL-181-B, USDA, FDA, EPA Approved
Swipe horizontally to reveal full table content.
Lamp (Option)
Type Halogen
Operating Voltage 120VAC, 60Hz
Nominal Amperage .42 Amps
Swipe horizontally to reveal full table content.
Lamp (Option)
Type LED
Operating Voltage 120VAC, 60Hz
Nominal Amperage .12 Amps
Swipe horizontally to reveal full table content.
Control
Type Electronic Timer
Operating Voltage 120VAC, 60Hz
Amperage Rating 20 Amps
Motorload 1HP
Swipe horizontally to reveal full table content.
Control (Option)
Type Slide Speed
Operating Voltage 120VAC, 60Hz
Amperage Rating 5 Amps